Greetings everyone!

I present a utility for supporting Xray on Keenetic routers — Xkeen.
All the code is written in pure shell and is open source on GitHub.

This post is updated regularly. The latest version is always on the Keenetic

What is Xray

Xray / v2ray is a very flexible utility for proxying and securing connections, created to bypass the GFW (Great Firewall of China).
It can even bypass blocks in Iran. I believe this solution will be sufficient in the Russian Federation for a considerable time.

The solution will not work in Turkmenistan without deep configuration
The solution will not work in the DPRK.
There is no internet there in the sense we are used to
The solution is used not only for bypassing blocks, but also for securing connections

Key features of Xray

Key features of Xkeen

Automatic build of the latest Xray version for your Keenetic.
Tested on aarch64, but should theoretically work on mips, mipsel.

Automatic updates
Can be enabled optionally with flexible configuration of update times

Xkeen
Xray
GeoSite
GeoIP

Integrated into the utility
Can be enabled optionally

GeoSite
GeoIP
- v2fly
- AntiFilter

Xkeen launch keys

Example of using launch keys: "xkeen -x", where "-x" is the key you selected.

Full installation cycle
-i — Required packages, Xray and Xkeen services

Update
-ux — Xray
-uk — Xkeen
-ugs — GeoSite
-ugi — GeoIP

Enable or change update rules
-uac — Xray, Xkeen, GeoSite, GeoIP
-uxc — Xray
-ukc — Xkeen
-ugsc — GeoSite
-ugic — GeoIP

Registration
-rx — Xray
-rk — Xkeen
-ri — Automatic startup of Xray using init

Remove / Automatic updates
-dac — Xray, Xkeen, GeoSite, GeoIP
-dxc — Xray
-dkc — Xkeen
-dgsc — GeoSite
-dgic — GeoIP

Remove / Utilities and components
-dx — Xray
-dk — Xkeen
-dgs — GeoSite
-dgi — GeoIP
-dc — Xray configurations
-dt — Temporary files

Remove / Registrations
-drx — Xray
-drk — Xkeen

Update utility registrations
-rrx — Xray
-rrk — Xkeen

Reinstall
-x — Xray
-k — Xkeen
-rc — Xray configuration files

Backups / Create
-xb — Xray
-kb — Xkeen
-cb — Xray configuration files

Backups / Restore latest
-xbr — Xray
-kbr — Xkeen
-cbr — Xray configuration files

Checks
-tpc — Connection
-tpx — Xray ports
-tfx — Xray files
-tfk — Xkeen files
-v — Xkeen version

Manage Xray
-start — Start Xray
-stop — Stop Xray
-restart — Restart Xray
-status — Show current Xray status

Author
-ad — If you find the utility useful, you can buy me a coffee
-af — Feedback

List of tested devices

Giga

KN-1010 / Works
KN-1011 / Works
KN-2410 / Works

Ultra

KN-1810 / Works
KN-1811 / Works
KN-2510 / Works

Peak

KN-2710 / Works

Hopper

KN-3610 / Works

Viva

KN-1910 / Works
KN-1912 / Works

Hero 4G+

KN-2311 / Works

Giant

KN-2610 / Works

If your device is not on the list, it doesn't mean Xkeen won't work on it.
It just means it hasn't been tested on it. Feel free to try installing it on your device.
You won't break anything.

If, when executing the command

xkeen -start

you get an error similar to

line 1: can't open html: no such file
line 2: syntax error: unexpected redirection

Please report it in the thread or to me via private message, specifying your router model.
The error will be fixed in a future update. Until then, your device is not supported.

Installation method

opkg install curl tar
curl -s -L https://github.com/Skrill0/XKeen/releases/latest/download/xkeen.tar --output xkeen.tar && tar -xvf xkeen.tar -C /opt/sbin --overwrite > /dev/null && rm xkeen.tar
xkeen -i

Select the GeoIP and GeoSite you are interested in.
You can install them all at once.
Set the automatic update time.
Done. You are awesome.
You can now configure Xray to suit your needs.
The configuration files are located at "/opt/etc/xray/configs/"
Some have detailed descriptions. You can delete them.

How the installation looks in PuTTy

Useful links for configuration

Xray GitHub repository
X project chat on Telegram — you can ask our Chinese friends.
I recommend writing in English.

Quick start from XTLS-Team
Basic guide from XTLS-Team
Advanced guide from XTLS-Team

Quick server setup on a VPS
Minimalistic, but more complex server setup on a VPS

Basic breakdown of technologies and protocols

Configuration samples

Useful GeoSite categories

GeoSite v2fly does not have a Ru zone.

Advertising

ext:geosite_v2fly.dat:category-ads-all — Compilation
* EasyList, AdGuard DNS Filter, Peter Lowe, Dan Pollok
ext:geosite_v2fly.dat:xiaomitv-ads
ext:geosite_v2fly.dat:adobe-ads
ext:geosite_v2fly.dat:apple-ads
ext:geosite_v2fly.dat:adcolony-ads
ext:geosite_v2fly.dat:adblock
ext:geosite_v2fly.dat:adblockplus
ext:geosite_v2fly.dat:adguard

Search engines

ext:geosite_v2fly.dat:duckduckgo
ext:geosite_v2fly.dat:google
ext:geosite_v2fly.dat:yandex

Games

ext:geosite_v2fly.dat:xbox
ext:geosite_v2fly.dat:playstation
ext:geosite_v2fly.dat:steam
ext:geosite_v2fly.dat:rockstar
ext:geosite_v2fly.dat:epicgames
ext:geosite_v2fly.dat:gog

Services

ext:geosite_v2fly.dat:sony
ext:geosite_v2fly.dat:microsoft
ext:geosite_v2fly.dat:nvidia
ext:geosite_v2fly.dat:xiaomi
ext:geosite_v2fly.dat:category-android-app-download
ext:geosite_v2fly.dat:openai
ext:geosite_v2fly.dat:paypal
ext:geosite_v2fly.dat:ebay
ext:geosite_v2fly.dat:facebook
ext:geosite_v2fly.dat:instagram
ext:geosite_v2fly.dat:youtube
ext:geosite_v2fly.dat:tiktok
ext:geosite_v2fly.dat:vk
ext:geosite_v2fly.dat:telegram
ext:geosite_v2fly.dat:whatsapp
ext:geosite_v2fly.dat:adobe
ext:geosite_v2fly.dat:adobe-activation

Additional Geo

ext:geosite_v2fly.dat:category-gov-ru — Russian government websites
ext:geosite_antizapret.dat:zapretinfo — Domain names from the AntiZapret list
ext:geosite_antifilter.dat:antifilter — Domain names from the AntiFilter list
ext:geosite_antifilter.dat:antifilter-community — Domain names from the AntiFilter Community list

Useful GeoIP categories

Main

ext:geoip_v2fly.dat:ru — Ru zone

Services

ext:geoip_v2fly.dat:cloudflare
ext:geoip_v2fly.dat:cloudfront
ext:geoip_v2fly.dat:facebook
ext:geoip_v2fly.dat:fastly
ext:geoip_v2fly.dat:google
ext:geoip_v2fly.dat:netflix
ext:geoip_v2fly.dat:twitter
ext:geoip_v2fly.dat:telegram
ext:geoip_v2fly.dat:private

Additional Geo

ext:geoip_antifilter.dat:antifilter — AntiFilter List
ext:geoip_antifilter.dat:antifilter-community — AntiFilter Community List

Basic method for manual routing configuration

Besides GeoIP / GeoSite, there are the following options for adding routes

Partial match
"vk.com" = "vk.com.ru", "music.vk.com.ru", "www.vk.com/im" ≠ vk.ru
Regular expression
Example entry: "regexp:\\.ya.*\\.ru$" = "www.yandex.ru", "mail.yandex.ru" ≠ "ya.ru"
Must start with "regexp:"
Subdomain
Example entry: "domain:keenetic.com" = "forum.keenetic.com" ≠ "forum.keenetic12345.com"
Exact match
Example entry: "full:keenetic.com" = "keenetic.com" ≠ "www.keenetic.com", "keenetic123.com"

Example entry in 10_routing.json

{
  "routing": {
    "rules": {
      "domain": [ //Указываем нужные Вам доменные имена
        "full:keenetic.com", // Точное совпадение
        "domain:keenetic.com", // Поддомен
        "regexp:\\.ya.*\\.ru$", // Регулярное выражение
        "vk.com", // Частичное совпадение
        "ext:geosite_antizapret.dat:ZAPRETINFO" // GeoSite AntiZapret
      ],
      "ip": [ // Указываем нужные Вам IP
        "192.168.1.1", // Точное совпадение
        "10.0.0.0/8", // CIDR
        "ext:geoip_antifilter.dat:antifilter" // GeoIP AntiFilter
      ],
      "outboundTag": "proxy" // Указываем тег подключения, через которое открывать ресурсы
    }
  }
}

When using the built-in Keenetic proxy client

The proxy client component from the firmware does not support UDP — Official response from Keenetic support

In policies, do not raise the proxy connection above the main one
* If you do, you need to specify the path to the VPS server in the routes. Thanks to Artem Laptev
Apply the proxy policy to specific clients
In the Proxy connection, "Use for Internet access" must be enabled
"localhost" does not work in the Keenetic proxy client settings.
Thanks to Artem Laptev
* Probably a feature of the proxy client implementation
On firmwares below 4.x, you need to set up a route through the created proxy connection, as shown in the screenshot below. Thanks to Artem Laptev.

Настройки маршрута в Web роутера — Route settings in the router's Web UI

At this stage, the built-in proxy client is the easiest way to direct the connection to Xray.
In 99% of cases, there is no point in messing with tproxy / dokodemo-door or marking UDP/TCP traffic.

The Keenetic proxy client directs the connection to Xray running on the router. And only then, for example, to the connection with the VPS.
Xray will also wrap your traffic in whatever you specified in its configuration.
For example, in TCP. Because the client and server connection must have an identical configuration. Otherwise, your traffic will be recognized as "foreign".

Maintaining comfort even on a mobile network

Once Xray is configured on the router, it can be used as a portal.
No additional configuration settings are needed for this.

Here are 2 ways to solve this task
1. IKE connection according to the Keenetic
2. SSTP connection according to the Keenetic / Thanks to @Alexey77

Uninstallation method

opkg remove xkeen
opkg remove xray

Delete backups in "/opt/"
* If you don't need backups of Xray / Xkeen / your configurations.

Known issues

~~Incorrectly detects processor model~~ ~~MIPS 1004Kc~~ Fixed
Xray compiles incorrectly on MIPS 24kc processors In progress
~~The -tpx key does not work~~ Fixed
~~Incorrectly works the selection of individual GeoIPs~~ Fixed

If Xray autorun on router startup or automatic updates do not work

Check that you have specified the path to the Entware autoloader initiator in the router's Web UI. This is done as follows

Access the interface through the router's gateway. By default, it is 192.168.1.1
Management > OPKG
Check the "initrc script" field. It should have the following content

/opt/etc/init.d/rc.unslung

Updates

Version 0.6 from September 12, 2023

Completely rewrote the logic for detecting the processor architecture and instruction set

Added backup Xray repositories

Minor interface fixes

Improved logging

Updated S05crond creation logic

Added support for Keenetic routers:

Giga

KN-1010 / Tested
KN-1011 / Tested
KN-2410 / Tested

Ultra

KN-1810 / Tested
KN-1811
KN-2510 / Tested

Peak

KN-2710

Hooper

KN-3810 / Tested
KN-3610 / Tested

Extra

KN-1710 / Tested
KN-1711 / Tested
KN-1713 / Tested

Viva

KN-1910 / Tested
KN-1912 / Tested

4G

KN-1210 / Tested
KN-1211 / Tested
KN-1212 / Tested

Hero 4G+

KN-2311 / Tested

DSL

N-2010 / Tested

Duo

KN-2110 / Tested

Omni

KN-1410 / Tested

Giant

KN-2610 / Tested

Version 0.7 from September 12, 2023

Fixed environment variables
Fixed architecture detection

Version 0.8 from September 17, 2023

Fixed GeoIP selection
Refactored code for architecture detection
Improved init script for Xray autorun
Added handling of important operations in the router log
* Stop / Start Xray, automatic updates, and others
Fixed the -tpx key

Project roadmap

Fixing bugs from the "Known issues" section
Improving the installation interface in the automatic updates module
Writing a series of articles from the poll in the thread on Xray configurations
Web interface / Tentative

Acknowledgements

If you need help

First, try to find the answer on the Keenetic forum using keywords
If you can't find the answer, then

Be respectful to forum members
Identify at what stage the problem occurs
What solutions have you already tried
Attach the log files from the following paths:
"/opt/var/log/xkeen/error.log", "/opt/var/log/xkeen/info.log", "/opt/var/log/xray/error.log", "/opt/var/log/xray/access.log".
Attach any screenshots you think are necessary
Make your post easy to read and well-formatted

I invite everyone in the thread to share their observations and solutions related to Xray and its configuration.
All solutions will be added to the top of the thread and, if possible, implemented in the utility in the future.

The author bears no responsibility and does not guarantee support

If you want to buy the author a coffee

Tinkoff

Direct link
tinkoff.ru/rm/krasilnikova.alina18/G4Z9433893

Card number
2200 7008 8716 3128

QIWI

Direct link
qiwi.com/n/21BUNNY21

QIWI wallet nickname
21BUNNY21

YooMoney

Direct link
yoomoney.ru/to/410018052017678

YooMoney wallet number
4100 1805 201 7678

Crypto

USDT coin, TRC20 network
TSC6Emx5KHK4CpYFKWj7duSYboKRAVxS3M

USDT coin, ERC20 network
0x4a0369a762e3a23cc08f0bbbf39e169a647a5661

USDT coin, BEP20 network
0x4a0369a762e3a23cc08f0bbbf39e169a647a5661

Xray on Keenetic / Xkeen