Programming microcontrollers *

Anyone who programs microcontrollers probably knows about FreeRTOS, or at least heard of this operating system. Amazon developers decided to enhance the abilities of this operating system to work with AWS Internet of Things services. This is how Amazon FreeRTOS appeared. We, developers of the PVS-Studio static code analyzer, were asked by mail and in comments to check these projects. Well, now get what you asked for. Keep reading to find out what came out of it.

Setting up Linux on the development board like SocKit with a double-core ARM Cortex A9 is not rocket science. A manufacturer of the board supports the ready-to-use image, appropriate for installing on SD card or another media. But what if you are craving to touch bare metal, approaching a neck-breaking speed of code not restrained by an OS core? Well, it is possible, but not so easy and obvious. In this short essay, I'll give you step-by-step instruction, how to build and run you first bare-metal application on Cyclone V SoC, that uses ARM Cortex A9 core of the HPS subsystem of the SoC.

You need to have the development board with Intel (Altera) Cyclone V SoC. I used SoCKit board:

This article will tell you how to launch analysis of an embedded project and how to work with the analyzer's report. The PVS-Studio analyzer supports a number of compilers for embedded systems. The current version allows checking projects built with one of the following compilers under Window, Linux, and macOS:

• IAR Embedded Workbench
• Keil Embedded Development Tools for Arm
• TI ARM Code Generation Tools
• GNU Embedded Toolchain

NodeMCU is an interactive firmware, which allows running Lua interpreter on the ESP8266 microcontroller (ESP32 support is in development). Alongside with all the regular hardware interfaces, it has WiFi module and SPIFFS file system.

This article describes the new module for the NodeMCU — sdm. SDM stands for simple driver model and it provides device-driver model abstraction for the system. In the first part of this article we will discuss the model itself and in the second part will be a showcase of dynamically created web user interface using sdm with some commentaries.

Let’s find out how to make a simple enough laser projector out of electronics you can find at home.

Introduction

As first-year students of Innopolis University, we had an opportunity to make our own project in computer architecture. University suggested us several projects and we have chosen to make a stack-based calculator with reverse polish notation. One of the requirements for the project is to use FPGA board provided by the university.



As our board, we have chosen Cyclon IV. Therefore, we had to write code on hardware description language. In the course we have studied Verilog, so we have chosen it. Also, the university has additional modules for FPGA, such as numpad, thus we decided to use it in our project.

In this article, we want to share our knowledge about FPGA and Verilog, also provide you with a tutorial to repeat our project.