• ## Locks in PostgreSQL: 4. Locks in memory

• Перевод
To remind you, we've already talked about relation-level locks, row-level locks, locks on other objects (including predicate locks) and interrelationships of different types of locks.

The following discussion of locks in RAM finishes this series of articles. We will consider spinlocks, lightweight locks and buffer pins, as well as events monitoring tools and sampling.

• ## Locks in PostgreSQL: 3. Other locks

• Перевод
We've already discussed some object-level locks (specifically, relation-level locks), as well as row-level locks with their connection to object-level locks and also explored wait queues, which are not always fair.

We have a hodgepodge this time. We'll start with deadlocks (actually, I planned to discuss them last time, but that article was excessively long in itself), then briefly review object-level locks left and finally discuss predicate locks.

When using locks, we can confront a deadlock. It occurs when one transaction tries to acquire a resource that is already in use by another transaction, while the second transaction tries to acquire a resource that is in use by the first. The figure on the left below illustrates this: solid-line arrows indicate acquired resources, while dashed-line arrows show attempts to acquire a resource that is already in use.

To visualize a deadlock, it is convenient to build the wait-for graph. To do this, we remove specific resources, leave only transactions and indicate which transaction waits for which other. If a graph contains a cycle (from a vertex, we can get to itself in a walk along arrows), this is a deadlock.

• ## Locks in PostgreSQL: 2. Row-level locks

• Перевод
Last time, we discussed object-level locks and in particular relation-level locks. In this article, we will see how row-level locks are organized in PostgreSQL and how they are used together with object-level locks. We will also talk of wait queues and of those who jumps the queue.

# Row-level locks

## Organization

Let's recall a few weighty conclusions of the previous article.

• A lock must be available somewhere in the shared memory of the server.
• The higher granularity of locks, the lower the contention among concurrent processes.
• On the other hand, the higher the granularity, the more of the memory is occupied by locks.

There is no doubt that we want a change of one row not block other rows of the same table. But we cannot afford to have its own lock for each row either.

There are different approaches to solving this problem. Some database management systems apply escalation of locks: if the number of row-level locks gets too high, they are replaced with one, more general lock (for example: a page-level or an entire table-level).

As we will see later, PostgreSQL also applies this technique, but only for predicate locks. The situation with row-level locks is different.
• ## Locks in PostgreSQL: 1. Relation-level locks

• Перевод
The previous two series of articles covered isolation and multiversion concurrency control and logging.

In this series, we will discuss locks.

This series will consist of four articles:

2. Row-level locks.
3. Locks on other objects and predicate locks.
4. Locks in RAM.

The material of all the articles is based on training courses on administration that Pavel pluzanov and I are creating (mostly in Russian, although one course is available in English), but does not repeat them verbatim and is intended for careful reading and self-experimenting.

Many thanks to Elena Indrupskaya for the translation of these articles into English.

# General information on locks

PostgreSQL has a wide variety of techniques that serve to lock something (or are at least called so). Therefore, I will first explain in the most general terms why locks are needed at all, what kinds of them are available and how they differ from one another. Then we will figure out what of this variety is used in PostgreSQL and only after that we will start discussing different kinds of locks in detail.
• ## WAL in PostgreSQL: 4. Setup and Tuning

• Перевод
So, we got acquainted with the structure of the buffer cache and in this context concluded that if all the RAM contents got lost due to failure, the write-ahead log (WAL) was required to recover. The size of the necessary WAL files and the recovery time are limited thanks to the checkpoint performed from time to time.

In the previous articles we already reviewed quite a few important settings that anyway relate to WAL. In this article (being the last in this series) we will discuss problems of WAL setup that are unaddressed yet: WAL levels and their purpose, as well as the reliability and performance of write-ahead logging.

# WAL levels

The main WAL task is to ensure recovery after a failure. But once we have to maintain the log anyway, we can also adapt it to other tasks by adding some more information to it. There are several logging levels. The wal_level parameter specifies the level, and each next level includes everything that gets into WAL of the preceding level plus something new.
• ## WAL in PostgreSQL: 3. Checkpoint

• Перевод
We already got acquainted with the structure of the buffer cache — one of the main objects of the shared memory — and concluded that to recover after failure when all the RAM contents get lost, the write-ahead log (WAL) must be maintained.

The problem yet unaddressed, where we left off last time, is that we are unaware of where to start playing back WAL records during the recovery. To begin from the beginning, as the King from Lewis Caroll's Alice advised, is not an option: it is impossible to keep all the WAL records from the server start — this is potentially both a huge memory size and equally huge duration of the recovery. We need such a point that is gradually moving forward and that we can start the recovery at (and safely remove all the previous WAL records, accordingly). And this is the checkpoint, to be discussed below.

# Checkpoint

What features must the checkpoint have? We must be sure that all the WAL records starting with the checkpoint will be applied to the pages flushed to disk. If it were not the case, during recovery, we could read from disk a version of the page that is too old, apply the WAL record to it and by doing so, irreversibly hurt the data.
• ## WAL in PostgreSQL: 2. Write-Ahead Log

• Перевод
Last time we got acquainted with the structure of an important component of the shared memory — the buffer cache. A risk of losing information from RAM is the main reason why we need techniques to recover data after failure. Now we will discuss these techniques.

# The log

Sadly, there's no such thing as miracles: to survive the loss of information in RAM, everything needed must be duly saved to disk (or other nonvolatile media).

Therefore, the following was done. Along with changing data, the log of these changes is maintained. When we change something on a page in the buffer cache, we create a record of this change in the log. The record contains the minimum information sufficient to redo the change if the need arises.

For this to work, the log record must obligatory get to disk before the changed page gets there. And this explains the name: write-ahead log (WAL).

In case of failure, the data on disk appear to be inconsistent: some pages were written earlier, and others later. But WAL remains, which we can read and redo the operations that were performed before the failure but their result was late to reach the disk.
• ## WAL in PostgreSQL: 1. Buffer Cache

• Перевод
The previous series addressed isolation and multiversion concurrency control, and now we start a new series: on write-ahead logging. To remind you, the material is based on training courses on administration that Pavel pluzanov and I are creating (mostly in Russian, although one course is available in English), but does not repeat them verbatim and is intended for careful reading and self-experimenting.

This series will consist of four parts:

Many thanks to Elena Indrupskaya for the translation of these articles into English.

# Why do we need write-ahead logging?

Part of the data that a DBMS works with is stored in RAM and gets written to disk (or other nonvolatile storage) asynchronously, i. e., writes are postponed for some time. The more infrequently this happens the less is the input/output and the faster the system operates.

But what will happen in case of failure, for example, power outage or an error in the code of the DBMS or operating system? All the contents of RAM will be lost, and only data written to disk will survive (disks are not immune to certain failures either, and only a backup copy can help if data on disk are affected). In general, it is possible to organize input/output in such a way that data on disk are always consistent, but this is complicated and not that much efficient (to my knowledge, only Firebird chose this option).

Usually, and specifically in PostgreSQL, data written to disk appear to be inconsistent, and when recovering after failure, special actions are required to restore data consistency. Write-ahead logging (WAL) is just a feature that makes it possible.
• ## On recursive queries

• Перевод
This article deals with writing recursive queries. This topic was brought up routinely, but the discussion was usually limited to simple cases related to trees: to descend from a vertex to the leaves and to ascend from a vertex to the root. We will address a more complicated case of an arbitrary graph.

Let's start with recalling the theory (very briefly since all of it is trivial), and then we will discuss what to do if it is unclear how to approach a real-life problem or if it seems to be clear, but the query persistently fails to work fine.

For an exercise, we will use the airlines demo database and try to write a query to find the shortest route from one airport to another.
• ## MVCC in PostgreSQL-8. Freezing

• Перевод
We started with problems related to isolation, made a digression about low-level data structure, discussed row versions in detail and observed how data snapshots are obtained from row versions.

Then we covered different vacuuming techniques: in-page vacuum (along with HOT updates), vacuum and autovacuum.

Now we've reached the last topic of this series. We will talk on the transaction id wraparound and freezing.
• ## PostgreSQL 13: параллельный VACUUM

На днях Амит Капила закоммитил патч Масахико Савады, который позволяет выполнять очистку в параллельном режиме. Сама таблица по-прежнему очищается одним (ведущим) процессом, но для очистки индексов он теперь может запускать фоновые рабочие процессы, по одному на каждый индекс. В ручном режиме это позволяет ускорить очистку больших таблиц с несколькими индексами; автоматическая очистка пока не использует эту возможность.
• ## MVCC in PostgreSQL-7. Autovacuum

• Перевод
To remind you, we started with problems related to isolation, made a digression about low-level data structure, discussed row versions in detail and observed how data snapshots are obtained from row versions.

Then we explored in-page vacuum (and HOT updates) and vacuum. Now we'll look into autovacuum.

# Autovacuum

We've already mentioned that normally (i. e., when nothing holds the transaction horizon for a long time) VACUUM usually does its job. The problem is how often to call it.

If we vacuum a changing table too rarely, its size will grow more than desired. Besides, a next vacuum operation may require several passes through indexes if too many changes were done.

If we vacuum the table too often, the server will constantly do maintenance rather than useful work — and this is no good either.

Note that launching VACUUM on schedule by no means resolves the issue because the workload can change with time. If the table starts to change more intensively, it must be vacuumed more often.

Autovacuum is exactly the technique that enables us to launch vacuuming depending on how intensive the table changes are.
• ## MVCC in PostgreSQL-6. Vacuum

• Перевод
We started with problems related to isolation, made a digression about low-level data structure, then discussed row versions and observed how data snapshots are obtained from row versions.

Last time we talked about HOT updates and in-page vacuuming, and today we'll proceed to a well-known vacuum vulgaris. Really, so much has already been written about it that I can hardly add anything new, but the beauty of a full picture requires sacrifice. So keep patience.

# Vacuum

## What does vacuum do?

In-page vacuum works fast, but frees only part of the space. It works within one table page and does not touch indexes.

The basic, «normal» vacuum is done using the VACUUM command, and we will call it just «vacuum» (leaving «autovacuum» for a separate discussion).

So, vacuum processes the entire table. It vacuums away not only dead tuples, but also references to them from all indexes.

Vacuuming is concurrent with other activities in the system. The table and indexes can be used in a regular way both for reads and updates (however, concurrent execution of commands such as CREATE INDEX, ALTER TABLE and some others is impossible).

Only those table pages are looked through where some activities took place. To detect them, the visibility map is used (to remind you, the map tracks those pages that contain pretty old tuples, which are visible in all data snapshots for sure). Only those pages are processed that are not tracked by the visibility map, and the map itself gets updated.

The free space map also gets updated in the process to reflect the extra free space in the pages.
• ## MVCC in PostgreSQL-5. In-page vacuum and HOT updates

• Перевод
Just to remind you, we already discussed issues related to isolation, made a digression regarding low-level data structure, and then explored row versions and observed how data snapshots are obtained from row versions.

Now we will proceed to two closely connected problems: in-page vacuum и HOT updates. Both techniques can be referred to optimizations; they are important, but virtually not covered in the documentation.

When accessing a page for either an update or read, if PostgreSQL understands that the page is running out of space, it can do a fast in-page vacuum. This happens in either of the cases:

1. A previous update in this page did not find enough space to allocate a new row version in the same page. Such a situation is remembered in the page header, and next time the page is vacuumed.
2. The page is more than fillfactor percent full. In this case, vacuum is performed right away without putting off till next time.
• ## MVCC in PostgreSQL-4. Snapshots

• Перевод
After having discussed isolation problems and having made a digression regarding the low-level data structure, last time we explored row versions and observed how different operations changed tuple header fields.

Now we will look at how consistent data snapshots are obtained from tuples.

# What is a data snapshot?

Data pages can physically contain several versions of the same row. But each transaction must see only one (or none) version of each row, so that all of them make up a consistent picture of the data (in the sense of ACID) as of a certain point in time.

Isolation in PosgreSQL is based on snapshots: each transaction works with its own data snapshot, which «contains» data that were committed before the moment the snapshot was created and does not «contain» data that were not committed by that moment yet. We've already seen that although the resulting isolation appears stricter than required by the standard, it still has anomalies.
• ## MVCC in PostgreSQL-3. Row Versions

• Перевод
Well, we've already discussed isolation and made a digression regarding the low-level data structure. And we've finally reached the most fascinating thing, that is, row versions (tuples).

As already mentioned, several versions of each row can be simultaneously available in the database. And we need to somehow distinguish one version from another one. To this end, each version is labeled with its effective «time» (xmin) and expiration «time» (xmax). Quotation marks denote that a special incrementing counter is used rather than the time itself. And this counter is the transaction identifier.

(As usual, in reality this is more complicated: the transaction ID cannot always increment due to a limited bit depth of the counter. But we will explore more details of this when our discussion reaches freezing.)
• ## MVCC in PostgreSQL-2. Forks, files, pages

• Перевод
Last time we talked about data consistency, looked at the difference between levels of transaction isolation from the point of view of the user and figured out why this is important to know. Now we are starting to explore how PostgreSQL implements snapshot isolation and multiversion concurrency.

In this article, we will look at how data is physically laid out in files and pages. This takes us away from discussing isolation, but such a digression is necessary to understand what follows. We will need to figure out how the data storage is organized at a low level.

# Relations

If you look inside tables and indexes, it turns out that they are organized in a similar way. Both are database objects that contain some data consisting of rows.

There is no doubt that a table consists of rows, but this is less obvious for an index. However, imagine a B-tree: it consists of nodes that contain indexed values and references to other nodes or table rows. It's these nodes that can be considered index rows, and in fact, they are.

Actually, a few more objects are organized in a similar way: sequences (essentially single-row tables) and materialized views (essentially, tables that remember the query). And there are also regular views, which do not store data themselves, but are in all other senses similar to tables.

All these objects in PostgreSQL are called the common word relation. This word is extremely improper because it is a term from the relational theory. You can draw a parallel between a relation and a table (view), but certainly not between a relation and an index. But it just so happened: the academic origin of PostgreSQL manifests itself. It seems to me that it's tables and views that were called so first, and the rest swelled over time.
• ## MVCC in PostgreSQL-1. Isolation

• Перевод
Hello, Habr! With this article I start a set of series (or a series of sets? — In a word, the idea is grandiose) about the internal structure of PostgreSQL.

The material will be based on training courses (in Russian) on administration that Pavel pluzanov and I are creating. Not everyone likes to watch video (I definitely do not), and reading slides, even with comments, is no good at all.

Unfortunately, the only course available in English at the moment is 2-Day Introduction to PostgreSQL 11.

Of course, the articles will not be exactly the same as the content of the courses. I will talk only about how everything is organized, omitting the administration itself, but I will try to do it in more detail and more thoroughly. And I believe that the knowledge like this is as useful to an application developer as it is to an administrator.

I will target those who already have some experience in using PostgreSQL and at least in general understand what is what. The text will be too difficult for beginners. For example, I will not say a word about how to install PostgreSQL and run psql.

The stuff in question does not vary much from version to version, but I will use the current, 11th vanilla PostgreSQL.

The first series deals with issues related to isolation and multiversion concurrency, and the plan of the series is as follows:

2. Forks, files, pages — what is happening at the physical level.
3. Row versions, virtual transactions and subtransactions.
4. Data snapshots and the visibility of row versions; the event horizon.
5. In-page vacuum and HOT updates.
6. Normal vacuum.
7. Autovacuum.
8. Transaction id wraparound and freezing.

Off we go!

And before we start, I would like to thank Elena Indrupskaya for translating the articles to English.

• ## Блокировки в PostgreSQL: 4. Блокировки в памяти

Напомню, что мы уже поговорили о блокировках отношений, о блокировках на уровне строк, о блокировках других объектов (включая предикатные), и о взаимосвязи разных типов блокировок.

Сегодня я заканчиваю этот цикл статьей про блокировки в оперативной памяти. Мы поговорим о спин-блокировках, легких блокировках и закреплении буфера, а также про средства мониторинга ожиданий и семплирование.

• ## Блокировки в PostgreSQL: 3. Блокировки других объектов

Мы уже поговорили о некоторых блокировках на уровне объектов (в частности — о блокировках отношений), а также о блокировках на уровне строк, их связи с блокировками объектов и об очереди ожидания, не всегда честной.

Сегодня у нас сборная солянка. Начнем с взаимоблокировок (вообще-то я собирался рассказать о них еще в прошлый раз, но та статья и так получилась неприлично длинной), затем пробежимся по оставшимся блокировкам объектов, и в заключение поговорим про предикатные блокировки.

# Взаимоблокировки

При использовании блокировок возможна ситуация взаимоблокировки (или тупика). Она возникает, когда одна транзакция пытается захватить ресурс, уже захваченные другой транзакцией, в то время как другая транзакция пытается захватить ресурс, захваченный первой. Это проиллюстрировано на левом рисунке ниже: сплошные стрелки показывают захваченные ресурсы, пунктирные — попытки захватить уже занятый ресурс.

Визуально взаимоблокировку удобно представлять, построив граф ожиданий. Для этого мы убираем конкретные ресурсы и оставляем только транзакции, отмечая, какая транзакция какую ожидает. Если в графе есть контур (из вершины можно по стрелкам добраться до нее же самой) — это взаимоблокировка.